The motor oil drain bolt is one of the less important components. However, if your motor oil drain bolt is loose or dol, you must replace it immediately, as quoted from GridOto.com, Here's the explanation.
When disassembling the motor oil drain bolt you must be careful in removing or even tightening it.
You need to be very careful because if you're not, the motor oil bolt can get stuck or dol.
Most often the motor oil drain bolt is slek because it is tilted or too hard when tightening the oil bolt.
Moreover, if you tighten it using too much force, the bolt hole thread is guaranteed to be stuck.
Hendri revealed that this slek oil bolt must be replaced immediately.
Usually there are mechanics who circumvent using water faucet insulation or seal tape.
However, it only works as an emergency or temporary solution because it is still prone to oil seepage.
Oil seepage is dangerous because it can cause the engine to lack oil, resulting in high friction between components.
It is better to look directly at the workshop or at the bolt shop with the appropriate size, at most the price is only 10 thousand rupiah.
Well, so for those of you who often change your own oil, don't be careless when tightening the oil bolt so that the drain bolt is not damaged.
Immediately carry out repairs if it is evident that there is a leak from the engine oil drain hole bolt.
EN 
ID